We did a full remodel [[for the second time) of our bathroom over last Thanksgiving. I did a lot of the demo work myself, although I really didn't want to. The cast iron tub is a little bit of a bitch to sledge and some of it will break into tiny slivers if you don't do it right. I suggest you work the inside just under the top of the tub, working either clockwise or counter depending on your dominate hand. Try and keep the pieces large enough to remove in chunks but not too big because this material is heavy and sharp as Hell. If loaded into a contractor bag it will most likely slice its way out if there is too much in the bag; I suggest using a garbage can that has wheels on it and wheel it outside and transfer into bags. I got lucky with mine. The folks who dropped off my stuff from the chain materials supplier noticed that the material in my driveway was metal and they took it away for scrap. PS if you still need a contractor let me know and I'll forward one of the best I ever had work for me. They are very reliable, reasonable, responsible, license and insured.
Bookmarks